• Device Name:-
  • Hardware Type:-
  • Bios Version:-
  • System App Version:-
  • Serial Numble:-
  • Connection Status:Disconnected
 
The upgrade function must run on the Internet Explorer of Windows Operating System
Please install the ActiveX Control. For more detail, please refer to the "How to upgrade".
Cannot communicate with the device, please confirm the device is in the upgrade mode and the USB cable has been plugged into the computer.
Cannot communicate with the device, please confirm the device is in the upgrade mode and the USB cable has been plugged into the computer.
Query Fail!
No Data
Error code: 0001
Error code: 0002
Error code: 0003
Error code: 0004
loading files, please wait...
Upgrading
File: Time: 00:00Finish: 0%
Sucessful!
  • FileVersionPost Time
    How to upgrade?
    • 1. This upgrade online operation must run on Windows IE.
    • 2. When running this page at the first time, please follow the Popup message to install the AciveX Control , then reboot IE.

    • 3. Upgrade steps:
    • 3.1 Set the device into the upgrade mode. For MP8200, keep pressing the "Photo" button on the top of MP8200, then plug the USB cable into the PC. When the beeper beeps, then release the button. Normally, now the connection status of MP8200 is shown as "Connected". If not, please refresh the browser by pressing "F5".
    • 3.2 All the optional firmwares for this device will be displayed on the browser. Select a firmware version by click the corresponding "Upgrade" button on the browser.
    • 3.3 When the upgrade operation is completed, the device will return to normal working mode. Now the connection status of the device is shown as "Disconnected".